軟成型封邊機KB-399R丨一機掌控，五種造型自由切換

來源：市場資訊

（來源：KDT極東機械）

極東機械軟成型直邊一體封邊機【KB-399R】智能操控，一鍵切換異型、直邊封邊，實現效率和品質的最優化。可滿足全圓弧、斜直邊、鴨嘴圓弧、斜圓弧和直邊多種工藝，實現效率和品質的最優化。

KDT Soft-Forming Edge Bander [KB-399R]Equipped with smart control system, capable of one-touch switch between straight and irregular edges. Support mutiple edge profiles, including full arc edge, beveled straight edge, duckbill arc edge, beveled arc edge, and straight edge, ensuring both efficiency and quality.

核心亮點 HIGHLIGHTS

履帶壓料機構

Belt-type Pressure Beam

壓緊接觸面積大，確保木板高速輸送的穩定性、提升封邊品質。

A large contact area on the panel ensures stable conveyance with high speed, improving edging quality.

壓梁自動定位

Pressure beam positioning system

快速切換加工不同厚度的板件，減少調機時間，提高效率。

Quick adjustment of pressure beam height according to panel thickness reduces setup time and increases efficiency.

伺服成型銑刀機構

Servo profile milling unit

配備2組高功率銑刀電機和4組不同輪廓的正反刃成型銑刀。4組伺服電機控制刀刃高度和進退位置，保證造型精度。

Equipped with dual 7.5kW motors and 4 sets of forward and reverse cutters for processing different edge profiles, 4 servo motors control the cutter height and forward/backward movement,ensuring high processing accuracy.

預銑機構

Pre-milling Unit

直邊預銑，異型伺服成型銑刀一鍵切換。正反刃預銑，封第三、四邊時不崩帶。

Support straight edge pre-milling and servo profile milling of irregular edges. Forward & reverse cutters prevent edge chipping during edge banding on the 3rd and 4th sides.

預熱裝置

Pre-Heating Unit

預熱板件，提升板材與邊帶的粘合效果。

Pre-heat the panel to improve adhesion with the tape.

封邊帶刻槽

Edge Tape Grooving

配備伺服電機聯動調節封邊帶刻槽高度，以及計數器調節封邊帶刻槽深度，直觀便捷。

Equipped with a servo motor for synchronized adjustment of grooving height and a counter for depth adjustment.

異型伺服成型壓貼

Servo-controlled profile pressing

伺服控制一鍵切換板厚，多組烤燈+熱風槍，邊帶軟化更充分。

Servo control enables one-touch switch between different edge profiles. Multiple heating lamps and hot air guns ensure the tape is fully softened.

直邊涂膠壓貼

Straight Edge Gluing & Pressing

直邊涂膠壓貼機構，方便調節，壓緊封邊條，保證壓貼效果。

Straight edge gluing & pressing units feature easy adjustment. The pressing unit firmly presses the tape to improve adhesion.

卓越配置Configurations

齊頭機構

End cutting

通過精密的直線導軌運動，快速切斷板材前后多余邊帶,確保切斷面平整光滑。

Motions along the precision linear guides, quickly cut off the excess edge at front and rear of the panel to ensure a smooth cut surface.

異型、直邊精修機構

Straight & irregular edge fine trimming unit

將突出于木板上下表面多余邊帶切除，使封邊帶上下邊緣與木板的上下表面平齊。

Remove the excess tape from surfaces of the board, make sure edging is flush.

異型直邊一體跟蹤機構

Straight & irregular edge corner rounding unit

柔性模式可減少對異型板材沖擊，實現鴨嘴、斜直邊、斜圓弧、全圓弧等形狀的仿型修邊工藝。

Flexible mode reduces impact on special-shaped panels and enables profiling trimming processes for various contours.

異型、直邊刮邊機構

Straight & irregular edge scraping unit

消除修邊非直線運動切削過程引起的波紋痕跡，使板材上下部分更加光滑整潔。

Trim off the tools marks, ensuring the best edging quality.

拋光機構

Buffing Unit

清除板件上下面的余膠和碎屑。

Removes residual glue and debris on top and bottom of panels.

視頻鑒賞Video Analysis

技術參數Technical parameters